Job Work for Laser Marking on Wire/Cables
Print Specification
- Standard Specification : Up to 96 character per identification. Barcode Marking Possible.
- Character set : Full uppercase and lowercase alphanumeric ( A-Z,0-9) plus extra characters.
Wire Size Range
- 0.8 mm to 6.35 mm ( 0.031” – 0.25”)
- OD 26 AWG – 6 AWG nominal.
- Single core or multi core wire and cable.
Cable Length
- Minimum 150 mm (6 in.)
- Unlimited maximum cable length.
Wire Types
- Polymide / Kapton wires, Dispersion coated Teflon ( PTFE)
- ETFE and FEP or Teflon tape wrapped ( TKT / TK )
- Teflon ( PTFE)
- Tefzel (ETFE, XLETFE) or FEP e.g. BMS 13-48, M22759/32 etc.
Horizontal and vertical mark spacing
- Between 25mm and 1000mm (1 in 39 in)
Inter Character Spacing
- Variable in increments of 0.1 mm (0.003 in)
- Minimum inter character pitch
- Maximum inter character pitch 20 mm (0.19 in)